After Ethereum entered the 2.0 era, pledging ETH to run nodes became a new business. Qualified node operators can obtain about 4% of the ETH currency standard income every year. If you are bullish on ETH in the long term, it is a very good financial choice.
However, in fact, the threshold for running a node is not low. It requires not only a capital threshold of 32 ETH, but also technical and hardware thresholds that require the node to operate stably. If you accidentally go offline, you will be fined.
As a result, a number of staking projects such as Lido and Rocketpool came into being to help users solve financial and technical problems.
The number of ETH pledges continues to rise. Currently, there are more than 29M ETH pledged in the beacon chain, with the total locked position value reaching $71B. The pledge ratio has increased from 2.4% in January 21 to 24.4% now.
(Source:https://cryptoquant.com/asset/eth/chart/eth2/eth-20-staking-rate-percent)
When users use a staking protocol, such as Lido, they will receive a liquid staking token (LST), such as stETH.
LST itself is an ERC20 token, so you can easily build a liquidity pool to reactivate this part of the locked liquidity and continue to invest in LSDFi projects, such as Frax and Origin, to obtain more arbitrage. Baby income.
(Source: https://facts.frax.finance/frxeth)
LSDFi is a DeFi project built on the basis of LST and LST derivatives, such as Pendle. After depositing stETH, you can get principal tokens and income tokens, thus deriving income strategies based on different risk preferences.
Node staking essentially allows users to pay deposits to run nodes and maintain project security. Nodes that perform their duties conscientiously will receive benefits, while those who fail to perform their duties or commit evil will forfeit their deposits.
Therefore, not only public chains need nodes, cross-chain bridges, oracles, DA, such as Chainlink, the Graph, Celestia and other various projects all require pledges to ensure the stability and security of their nodes.
The number, quality and huge capital investment of Ethereum nodes make it the most reliable public chain.
However, any module that cannot be deployed or verified on the EVM cannot take advantage of the trust of the Ethereum network and requires someone to run the node and provide Active Verification Service (AVS).
And running nodes requires users to spend real money to ensure safety, which is bound to be difficult under the premise of limited liquidity.
The solution proposed by EigenLayer is to allow other AVS to inherit and share the security of Ethereum through re-pledge.
(Source:EigenLayer)
Essentially, EigenLayer provides a pool security mechanism and a security market, that is, multiple projects can share the Ethereum security pool, and users need to weigh the benefits and risks provided by each project to choose to join or exit in EigenLayer The re-pledge module built on.
The economic benefits of re-pledge are obvious.
Of course, this is not a completely risk-free win-win outcome.
For users, staking to EigenLayer is a good choice with multiple benefits, but it faces several problems:
Therefore, the emergence of the LRTFi project mainly solves these problems and lowers the threshold for re-pledge.
The income of LRT is built on LST, which will obviously have higher returns. At the same time, LRT projects will also have higher risks. The main risks are as follows.
Currently, LRT projects have been launched including EtherFi, Renzo, Swell and KelpDAO, and nearly ten more are on the test network. There is not much difference in the gameplay of the projects. The main difference lies in the ability to mine EigenLayer points and exit liquidity. The next step is Let me introduce to you these four projects that have been launched.
EtherFi completed a $5.3 million seed round in February last year, and its TVL currently exceeds $330 million.
Users can get $eETH by depositing ETH, and by participating, they can get EigenLayer points and EtherFi’s own loyalty points at the same time, which are both reference standards for subsequent airdrops. It is also very convenient to withdraw from liquidity. The unstake function is now online and the friction of withdrawal is small.
(Source:https://defillama.com/protocol/ether.fi)
Furthermore, you can deposit $eETH into Pendle to split PT and YT. Currently, the premium of YT is very high. If you sell it immediately, you will get 10% profit. The remaining PT can be redeemed for the complete principal after maturity. gold.
For specific operations, please see:
Eat three fish with one fish: Tutorial on using Pendle to get ten times EigenLayer points
(Source:https://app.pendle.finance/trade/markets)
Renzo has previously disclosed less information. After announcing a 3.2 million seed round of financing led by Maven11 last week, TVL rose in response and currently reaches US$100 million.
In addition to ETH, Renzo also supports LSTs such as rETH, cbETH, stETH. Renzo’s LRT token is $ezETH, and it has launched the points program Renzo ezPoints. The way to obtain points is to mint $ezETH. There is currently no way to withdraw from liquidity.
(Source: https://defillama.com/protocol/renzo)
KelpDAO is launched by Stader, an old project. Similarly, after staking, you can get LRT $rsETH and get KelpDAO points.
After EigenLayer opens deposits on January 29, all coins currently deposited will be transferred to EigenLayer and double points will be obtained.
Compared with other projects, there are fewer airdrop expectations, and Stader’s token $SD is already available. Moreover, KelpDAO’s pledge is through EigenLayer’s LST open pledge, so there is an upper limit on the funds that can be accommodated, but it cannot be withdrawn temporarily.
(Source:https://defillama.com/protocol/kelp-dao)
Swell is an LST project and has joined the ranks of LRT. Users can deposit ETH to earn staking income, or use swETH to participate in projects such as Pendle.
Its Super swETH product allows users to deposit ETH or stETH to earn annualized returns of up to 18%. In addition to staking income, you can also obtain Pearls (pearls, similar to a point certificate), which may be exchanged for Swell tokens during TGE.
The current TVL of the protocol exceeds $425M. If you deposit swETH, you will not be able to obtain EigenLayer points until EigenLayer opens mining on January 29. rswETH that will subsequently launch LRT can directly participate in dual mining. It is also very convenient to withdraw liquidity. There is a trading pool and you can swap directly. Change to ETH.
(Source: https://defillama.com/protocol/swell)
Puffer is based on the liquidity staking protocol on Eigenlayer. It is a very technical re-staking project. It received early funding from the Ethereum Foundation to develop Secure-Signer technology to reduce the risk of slashing and maximize the efficiency of independent operators. quantity, thus achieving network decentralization.
Puffer’s node is both a verification node of Ethereum and a native node on EigenLayer, so it can obtain Ethereum rewards and Eigenlayer re-staking rewards at the same time. Puffer received $5.5 million in seed funding from investors including the founders of EigenLayer.
Both Ethereum and EigenLayer have penalty mechanisms. The private key security and penalty resistance of Puffer nodes are jointly protected by Secure-signer, RAV software and TEE hardware, effectively reducing the risks of LSD and LSDFI assets.
The summary table of projects that have been launched is as follows:
LRT projects based on EigenLayer are relatively complex and involve all aspects of details.
For example, the types of tokens that can be pledged (ETH, LSTs), the token of the protocol itself (LRT), the source of rewards distributed, the protocol charging model, and the way to pledge to EigenLayer (whether through LST pledge or EigenPod pledge, which determines the protocol capital cap).
Similar to the LST project, under the premise of contract audit security, the earlier the LRT project goes online, the easier it is for the protocol to have a first-mover advantage and build its own brand and network effect.
The funds on the market are limited, so it is crucial to seize the opportunity and lead the market. However, LRT has its complexity, and how to manage risks is also a major competitiveness of LRT projects.
The LRT project will also be the same as the LST project. In order to ensure the stable operation of nodes, it will seek cooperation with DVT technology projects, such as Obol and SSV; LRT-based lending, dex, and derivatives will gradually appear; in addition, it will provide multi-chain projects with Support will also be one of the development directions of the LRT project.
After Ethereum entered the 2.0 era, pledging ETH to run nodes became a new business. Qualified node operators can obtain about 4% of the ETH currency standard income every year. If you are bullish on ETH in the long term, it is a very good financial choice.
However, in fact, the threshold for running a node is not low. It requires not only a capital threshold of 32 ETH, but also technical and hardware thresholds that require the node to operate stably. If you accidentally go offline, you will be fined.
As a result, a number of staking projects such as Lido and Rocketpool came into being to help users solve financial and technical problems.
The number of ETH pledges continues to rise. Currently, there are more than 29M ETH pledged in the beacon chain, with the total locked position value reaching $71B. The pledge ratio has increased from 2.4% in January 21 to 24.4% now.
(Source:https://cryptoquant.com/asset/eth/chart/eth2/eth-20-staking-rate-percent)
When users use a staking protocol, such as Lido, they will receive a liquid staking token (LST), such as stETH.
LST itself is an ERC20 token, so you can easily build a liquidity pool to reactivate this part of the locked liquidity and continue to invest in LSDFi projects, such as Frax and Origin, to obtain more arbitrage. Baby income.
(Source: https://facts.frax.finance/frxeth)
LSDFi is a DeFi project built on the basis of LST and LST derivatives, such as Pendle. After depositing stETH, you can get principal tokens and income tokens, thus deriving income strategies based on different risk preferences.
Node staking essentially allows users to pay deposits to run nodes and maintain project security. Nodes that perform their duties conscientiously will receive benefits, while those who fail to perform their duties or commit evil will forfeit their deposits.
Therefore, not only public chains need nodes, cross-chain bridges, oracles, DA, such as Chainlink, the Graph, Celestia and other various projects all require pledges to ensure the stability and security of their nodes.
The number, quality and huge capital investment of Ethereum nodes make it the most reliable public chain.
However, any module that cannot be deployed or verified on the EVM cannot take advantage of the trust of the Ethereum network and requires someone to run the node and provide Active Verification Service (AVS).
And running nodes requires users to spend real money to ensure safety, which is bound to be difficult under the premise of limited liquidity.
The solution proposed by EigenLayer is to allow other AVS to inherit and share the security of Ethereum through re-pledge.
(Source:EigenLayer)
Essentially, EigenLayer provides a pool security mechanism and a security market, that is, multiple projects can share the Ethereum security pool, and users need to weigh the benefits and risks provided by each project to choose to join or exit in EigenLayer The re-pledge module built on.
The economic benefits of re-pledge are obvious.
Of course, this is not a completely risk-free win-win outcome.
For users, staking to EigenLayer is a good choice with multiple benefits, but it faces several problems:
Therefore, the emergence of the LRTFi project mainly solves these problems and lowers the threshold for re-pledge.
The income of LRT is built on LST, which will obviously have higher returns. At the same time, LRT projects will also have higher risks. The main risks are as follows.
Currently, LRT projects have been launched including EtherFi, Renzo, Swell and KelpDAO, and nearly ten more are on the test network. There is not much difference in the gameplay of the projects. The main difference lies in the ability to mine EigenLayer points and exit liquidity. The next step is Let me introduce to you these four projects that have been launched.
EtherFi completed a $5.3 million seed round in February last year, and its TVL currently exceeds $330 million.
Users can get $eETH by depositing ETH, and by participating, they can get EigenLayer points and EtherFi’s own loyalty points at the same time, which are both reference standards for subsequent airdrops. It is also very convenient to withdraw from liquidity. The unstake function is now online and the friction of withdrawal is small.
(Source:https://defillama.com/protocol/ether.fi)
Furthermore, you can deposit $eETH into Pendle to split PT and YT. Currently, the premium of YT is very high. If you sell it immediately, you will get 10% profit. The remaining PT can be redeemed for the complete principal after maturity. gold.
For specific operations, please see:
Eat three fish with one fish: Tutorial on using Pendle to get ten times EigenLayer points
(Source:https://app.pendle.finance/trade/markets)
Renzo has previously disclosed less information. After announcing a 3.2 million seed round of financing led by Maven11 last week, TVL rose in response and currently reaches US$100 million.
In addition to ETH, Renzo also supports LSTs such as rETH, cbETH, stETH. Renzo’s LRT token is $ezETH, and it has launched the points program Renzo ezPoints. The way to obtain points is to mint $ezETH. There is currently no way to withdraw from liquidity.
(Source: https://defillama.com/protocol/renzo)
KelpDAO is launched by Stader, an old project. Similarly, after staking, you can get LRT $rsETH and get KelpDAO points.
After EigenLayer opens deposits on January 29, all coins currently deposited will be transferred to EigenLayer and double points will be obtained.
Compared with other projects, there are fewer airdrop expectations, and Stader’s token $SD is already available. Moreover, KelpDAO’s pledge is through EigenLayer’s LST open pledge, so there is an upper limit on the funds that can be accommodated, but it cannot be withdrawn temporarily.
(Source:https://defillama.com/protocol/kelp-dao)
Swell is an LST project and has joined the ranks of LRT. Users can deposit ETH to earn staking income, or use swETH to participate in projects such as Pendle.
Its Super swETH product allows users to deposit ETH or stETH to earn annualized returns of up to 18%. In addition to staking income, you can also obtain Pearls (pearls, similar to a point certificate), which may be exchanged for Swell tokens during TGE.
The current TVL of the protocol exceeds $425M. If you deposit swETH, you will not be able to obtain EigenLayer points until EigenLayer opens mining on January 29. rswETH that will subsequently launch LRT can directly participate in dual mining. It is also very convenient to withdraw liquidity. There is a trading pool and you can swap directly. Change to ETH.
(Source: https://defillama.com/protocol/swell)
Puffer is based on the liquidity staking protocol on Eigenlayer. It is a very technical re-staking project. It received early funding from the Ethereum Foundation to develop Secure-Signer technology to reduce the risk of slashing and maximize the efficiency of independent operators. quantity, thus achieving network decentralization.
Puffer’s node is both a verification node of Ethereum and a native node on EigenLayer, so it can obtain Ethereum rewards and Eigenlayer re-staking rewards at the same time. Puffer received $5.5 million in seed funding from investors including the founders of EigenLayer.
Both Ethereum and EigenLayer have penalty mechanisms. The private key security and penalty resistance of Puffer nodes are jointly protected by Secure-signer, RAV software and TEE hardware, effectively reducing the risks of LSD and LSDFI assets.
The summary table of projects that have been launched is as follows:
LRT projects based on EigenLayer are relatively complex and involve all aspects of details.
For example, the types of tokens that can be pledged (ETH, LSTs), the token of the protocol itself (LRT), the source of rewards distributed, the protocol charging model, and the way to pledge to EigenLayer (whether through LST pledge or EigenPod pledge, which determines the protocol capital cap).
Similar to the LST project, under the premise of contract audit security, the earlier the LRT project goes online, the easier it is for the protocol to have a first-mover advantage and build its own brand and network effect.
The funds on the market are limited, so it is crucial to seize the opportunity and lead the market. However, LRT has its complexity, and how to manage risks is also a major competitiveness of LRT projects.
The LRT project will also be the same as the LST project. In order to ensure the stable operation of nodes, it will seek cooperation with DVT technology projects, such as Obol and SSV; LRT-based lending, dex, and derivatives will gradually appear; in addition, it will provide multi-chain projects with Support will also be one of the development directions of the LRT project.